Luxe Tint Set Tutorial: Eyebrows
Oxidant gel: The tube with the white lid.
Color: The tube with the black lid.
STEP 1: Clean, degrease and prepare
Before application, clean the areas you want to dye.
Important: Before your first treatment or after a long dye break, please do a patch test. This does not guarantee that there will be no reaction during the treatment!
Tools: Cotton Pad, Cleanser/ Oilfree Make-up Remover, Cotton Swab

STEP 2: Mixing the dye
Put a pea size of the tint (squeeze about 1 cm of cream out of the tube) and about 10-12 drops of Oxidant Gel into a glass/bowl and mix until it has a creamy consistency, 1:1 mixing ratio.
Tools: Tint, Oxidant Gel, Glass/Bowl (not in the set), Brush
STEP 3: Apply Color
Put the already mixed Luxe Tint onto your eyebrows. You can correct any mistakes with a cotton swab. Let it take effect for 5-10 minutes. (2-3 minutes for a light result)
Optional: Cover the area around your eyebrows with vaseline to protect your skin.
Important: Apply the color directly onto your skin - in the direction of growth.
Tools: Brush, Tint, Cotton Swab

STEP 4: Remove the tint
Remove the color with some wet cotton pads. After you have removed all the color, comb your eyebrows with a lash brush.
Tools: Cotton Pad, Lash Brush

Luxe Tint Set Tutorial: Eyelashes
STEP 1: Clean, degrease and prepare
Before application, clean the areas you want to dye with a cleanser. Put the 'Lash Papers'' as close to your lash line as possible. Use some vaseline to properly attach the ''Lash Paper''.
Important: Before your first treatment or after a long dye break, please do a patch test. This does not guarantee that there will be no reaction during the treatment! Remove contact lenses before you dye your lashes. In case you're using this while also using the Luxe Lash Lifting Set, proceed to Step 2 and ignore Step 1 because your lashes are already fixed. We recommend doing one eye at a time!
Tools: Cleanser/Oilfree Make-up Remover, Cotton Swab, Cotton Pads

STEP 2: Mixing the dye
Put a pea size of the tint (squeeze about 1 cm of cream out of the tube) and about 10-12 drops of Oxidant Gel into a glass/bowl and mix until it has a creamy consistency, 1:1 mixing ratio.
Tools: Tint, Oxidant Gel, Glass/Bowl (not in the set), Brush
STEP 3: Apply Color
Apply the mixed color generously on all of your lashes, from the lash line to the tip of your lashes. Close your eye while applying to prevent the color from entering your eyes. Let it take effect for 10 minutes. Carefully remove the color (this works best if you tighten your eyelid) and repeat those steps on your other eye (2-3 minutes for a light result)!
Tools: Brush, Tint

STEP 4: Remove the tint
Remove the color and the ''Lash Paper'', without using too much pressure, with a wet cotton pad from your eyes. Wipe from the inside to the outside, so nothing will enter your eyes. Repeat this until there is no color residue left.
Important: In case some color gets into your eyes, rinse thoroughly with water!
Tools: Cotton Pad
